Diagnosis/Improvement of Power Quality and Introduction of Monitoring Technique
We adopt Active Harmonic Conditioner (A.I.M).
Operation Procedure:
1. Monitor and investigate power & loading system on customers¡¦ site. 
2. Analyze information of power quality and analyze & calculate load/harmonics.
3. Design and install active harmonic conditioner and monitor & adjust.

Principle
Such technique is used to isolate harmonic current and to protect electronic equipment on power system in order to prevent from interruption and detriment caused by relative distortion of voltage and harmonic current.
The patented A.I.M of RUDOLF can not only continuously monitor non-linear current required by load but also offer suitable current waveform in order to make up for the situation of non-linear part on loading current. Also, this A.I.M inputs matching current into load in order to reduce such problem of harmonic current on connection side.
Even when harmonic frequency varies, IGBT PWM of A.I.M can react in the unit of second (£gsec) in order to provide revised level volume that can eliminate harmonics, to adjust and to offer the required non-linear loading current.
A.I.M won¡¦t be affected by the impedance inside power system. Neither will it influence other equipment. Indeed, since A.I.M is of non-resonance principle, it won¡¦t affect resonance point of power system. Therefore, it is only required to simply connect in parallel with one or more non-linear load in terms of the installation of A.I.M. For more details, please visit our Chinese website.